Dumpster rental service
Roofing debris disposal in Melbourne, FL
Roofing debris disposal is what you need when a tear-off turns the yard into a pile of shingles, nails and rotted wood. Brevard Binworks is a Melbourne, FL operator. We deliver a roll-off container to the job, your crew or you fill it, and our team hauls it away when the roof is done.
Roofs shed material quickly, and it falls in places that matter: flower beds, pool decks, driveways. A container parked close to the house catches most of it and keeps the site safe to walk. Call (321) 341-3232 or use live chat on the website and tell us what is coming off the roof.
- Professional service you can count on
- 5 roll-off sizes, 10 to 40 yards
- Serving Melbourne and 6 nearby areas
What a tear-off leaves behind
A full re-roof sends down layers, not one material. Asphalt shingles come first, then underlayment, then any damaged plywood or boards, plus old flashing, vent boots and the nails that held it all together. A repair after a storm produces less, but it often arrives mixed with soaked insulation or broken trim from the same area.
Because the pieces are flat and awkward, they stack unevenly if tossed in at random. Loading in layers, with the flat shingle runs laid down first and bulkier wood on top, keeps the container usable to the end of the job. Your roofer may already have a routine for this, and we are glad to work around it.
Typical loads from a roof job
These are the materials people most often ask us about. Whether a specific item is accepted is confirmed when you call.
- Asphalt shingles, whole or in torn strips
- Underlayment and tar paper
- Damaged roof decking and fascia boards
- Metal flashing, drip edge and old vent covers
- Loose nails and cut-offs swept up from the ground
- Gutter sections removed during the same project
Sizing the container without guessing
The right container depends on the roof, not just the house. Ask your roofer how many layers are coming off, whether decking will be replaced and whether a garage or shed roof is part of the work. A single-layer job on a small house and a two-layer tear-off on a larger one are very different loads.
We give general guidance only, and the exact container is confirmed when you call. If you want to read about the options first, see our dumpster size guides and the article on what size dumpster you need. Having a rough roof description ready makes the phone call quick.
How the haul works from first call to pickup
Describe the job
Tell us the town, what is coming off the roof and where the container could sit. Call (321) 341-3232 or use live chat.
Pick a delivery window
Delivery should land before the crew starts. We confirm timing when you call, because it depends on the schedule and the job.
Load as the roof comes off
Keep the container close to the eaves. Roofers can drop material in, and you can sweep the yard into it at the end.
We haul it away
When the job is finished, call us and our team removes the container. Keep the area clear so the truck can reach it.
Driveway, ground and permission
Roofing material is heavy, so the ground under the container matters. A paved driveway is the usual spot. A lawn can rut, and soft ground after rain is worse. If the only option is grass, tell us when you call so we can talk through it before the container goes down.
A container on a public street may need a city or county permit, and requirements differ between places such as Melbourne, Palm Bay and Satellite Beach. Check with your local authority before you book. Our article on dumpster permits in Melbourne explains what to ask. Neighborhood associations may have their own rules too.
Leave these out of the container
Anything hazardous stays out. Florida DEP guidance says hazardous waste cannot go in local landfills, so a dumpster can't take it.
- Cans of roofing cement, sealant, primer, adhesive or paint
- Solvents, fuel and other chemicals used on the job
- Batteries from tools and equipment
- Used oil filters, which Florida DEP says may not go to landfills
- Any material you suspect contains asbestos, which needs a local disposal program and not a dumpster
Service areas
Roofing debris disposal available in these areas
Looking for roofing debris disposal in Melbourne? Start with our Roofing debris disposal in Melbourne page, or pick your area below: each covers placement, permits and the projects we see there.
The Brevard Binworks approach
Why Melbourne customers rent from Brevard Binworks
We rent our own dumpsters, so the size, the spot and the pickup date are worked out together ahead of delivery.
Fitting the site
Driveways, lots and work areas considered up front
Upfront terms
Cost, rental length and weight limits explained before you say yes
Loading help
What is allowed inside and how to fill it safely
Guides
Helpful guides
- Roofing Dumpster Rental Guide: Planning Debris Before the Tear-OffHow to plan a dumpster for a roof job in the Melbourne area: what goes in, what stays out, placement, permits and what moves the cost.Learn more
- Do You Need a Permit for a Dumpster in Melbourne?When a dumpster in Melbourne, FL may need a permit, who decides, and how to check before delivery.Learn more
- What Cannot Go in a Dumpster in Melbourne, FL?A plain guide to the materials that must stay out of a rental container, why the rule exists and where to take those items instead.Learn more
Before you book
Common questions, answered
Quick answers about sizes, loading and scheduling, so you know what to expect when you call.
Do you take old shingles from a roof replacement in Melbourne, FL?
Yes, Brevard Binworks supplies roll-off containers for shingle tear-offs in Melbourne and nearby towns. We confirm what the container can hold and how much material it suits when you call (321) 341-3232. Tell us the roof type and layers, and we will go through the details with you before delivery is arranged.
Can my roofer load the container, or do I have to?
Either can, and many roofers already plan around a container on site. Brevard Binworks delivers the container and hauls it away. Who fills it is your decision. Let your roofer know the container is coming so they can plan where it sits, and call us if the crew has particular access needs.
How big a container does a re-roof need?
It depends on the roof size, the number of layers and whether decking is being replaced. We give general guidance only, with the exact container confirmed when you call. Browse our size guides first, then call (321) 341-3232 so we can match the container to your actual project.
Where should the container go during a tear-off?
Place it as close to the roof edge as the ground allows, usually on the driveway. Brevard Binworks looks at access when you call, including overhead lines, gates and slope. If it has to go on a street, check with your local authority about a permit before delivery.
Can paint cans or roofing sealant go in the container?
No. Roofing cement, sealant, adhesives, paint and solvents are hazardous materials, and Florida DEP guidance says hazardous waste cannot go in local landfills. Keep them out of the dumpster and contact your local disposal program. Brevard Binworks can answer questions about what else to separate when you call.
What does a roofing dumpster rental cost?
The cost depends on the container, the material, the location and the timing. Brevard Binworks does not publish figures on this page, and the details are confirmed when you call (321) 341-3232. Our cost factors guide lists what to have ready so the conversation is short.
Planning a tear-off?
Call (321) 341-3232 or start live chat. Tell us the town and the roof, and we will arrange the container.